Table of Contents
Advertisement
Operator Cab
Declutch Indicator
The declutch indicator illuminates when the Declutch
switch is set to the ON position (clutch disengaged).
If the declutch indicator does not illuminate, stop the
forklift, follow proper shut down procedures, tag the
forklift with "Do Not Operate" tags, and have a qualified
mechanic service or repair the forklift BEFORE placing it
into service again.
Figure 6-33. Declutch Indicator.
Declutch Switch
The Declutch switch disengages the transmission to
prevent the forklift from shifting into gear and moving
while raising or lowering a load.
• When the Declutch switch is set to ON and the service
brake applied, the transmission is disengaged.
• When the Declutch switch is set to OFF, the transmission
remains engaged when the travel select lever is set to
either FORWARD or REVERSE.
Figure 6-34. Declutch Switch.
Page 38
Boom Control
The boom control handle has variable motions from the
center to control boom functions.
Figure 6-35. Boom Control Handle.
The boom control handle is used to raise, lower, extend,
and retract the boom.
NOTE: The boom control handle is a variable speed
control. Function speed is adjustable based upon how
far the handle is moved. The more the handle is moved
in the appropriate direction, the faster the corresponding
function will occur.
NOTE: Increasing engine speed can increase boom lift
and extend speed.
NOTE: Two (2) boom functions can be performed at the
same time by moving the handle into the corner between
two (2) functions. For example, moving the handle to the
forward, left corner will lower and retract the boom at the
same time.
XRM945
Xtreme Manufacturing, LLC
Advertisement
Table of Contents
