Xtreme Manufacturing XRM945 Operation & Safety Manual page 70

Preventive Maintenance
After Every 500 Hours of Operation
Comply with 50-Hour Maintenance Requirements
Comply with 250-Hour Maintenance Requirements
Replace air filter
Replace fuel filter
Empty air filter dust cup
Check engine hoses and connections for leaks,
damage, and tightness
Check radiator hoses for leaks, damage, and tightness
Check engine electrical cables, leads, and connections
for damage and tightness
Check specific gravity of engine coolant
Replace transmission fluid and filters
Replace hydraulic reservoir air breather
Replace hydraulic return line filter
Inspect wheel/tire assemblies
Page 70
After Every 1,000 Hours of Operation
Comply with 50-Hour Maintenance Requirements
Comply with 250-Hour Maintenance Requirements
Comply with 500-Hour Maintenance Requirements
Change transmission fluid
Change wheel-end oil
Change differential oil
Check valve tip clearance. Adjust if necessary.
Inspect boom chains
Replace hydraulic high-pressure filter
After Every 2,000 Hours of Operation
Comply with 50-Hour Maintenance Requirements
Comply with 250-Hour Maintenance Requirements
Comply with 500-Hour Maintenance Requirements
Comply with 1,000-Hour Maintenance Requirements
Change hydraulic fluid
Clean or replace hydraulic reservoir strainer
After Every 4,000 Hours of Operation
Drain and flush cooling system –After every 4,000
hours of operation
XRM945
Xtreme Manufacturing, LLC