Table of Contents
Advertisement
XRM945
7. Insert quick attach pin completely through the
attachment and quick attach link.
Figure 7-30. Insert Quick Attach Pin Through Attachment and Quick
Attach Link.
8. Check the quick attach lock lever and make sure it has
lowered and seated itself in groove (A) of the quick
attach pin.
Figure 7-31. Make Sure Quick Attach Lock Lever Is Seated In Groove
(A) Of Quick Attach Pin.
For information call (800) 497-1704
Warning
Hydraulic attachments have a maximum
hydraulic pressure rating. Failure to make
sure the attachment is equal to or slightly
greater than 3,500 psi (241.4 bar), which
is the maximum pressure of the forklift auxiliary
hydraulic system at the quick attach couplers, could
result in injury or death.
Make sure all hydraulic connections are tight (if
equipped).
9. Connect the quick attach couplers (this only applies
to attachments with a quick attach hydraulic system).
Figure 7-32. Connect Quick Attach Couplers.
(A) Female Coupler. (B) Male Coupler.
Operation
Page 61
Advertisement
Table of Contents
