Insportline Yukona User Manual page 7

STEP 3

Unfold the rail (48) and thereafter attach the connection bracket (11) to the base frame (3)
using button head bolts M8x20 mm (85) and washers M8 (62).
STEP 4

Attach the seat (21) to the seat carriage (10) with round head bolts M6x15 mm (63) and
washers M6 (64).
STEP 5

Insert the handlebar (15) through the handlebar sleeve (103) Slide the foam grip (22) onto the
protruding end of the handlebar (15).
NOTE: Lubricate the handlebar (15) with a small amount of liquid soap or water for easier installation
of the foam grip (22).
STEP 6

Put the end cap (30) into the rear stand (2).
STEP 7

Lock the front cover (28) onto the base frame (3) with round head screw ST4.2x45 (81).
7