Panasonic SF4B V2 Series Instruction Manual page 31

<Reference>
There is no difference in the cable for series connection for the emitter and the receiver.
The length of the cable for series connection differs depending on the model No.
Model No.
SFB-CSL01
SFB-CSL05
SFB-CSL1
SFB-CSL5
<Dismantling the cable for series connection>
1. For dismantling the cable for series connection, follow the above procedure of <Mounting
method of cable for series connection> in reverse.
© Panasonic Industriar Devices SUNX Co., Ltd. 2012 ME-SF4BV2-05
Take care that the shape of the connectors for the bottom side and for the end
cap side on the cable for series connection (6)%&6/ ) is different.
The cable for series connection (6)%&6/ ) cannot be extended.
When the cable for series connection (6)%&6/ ) is inserted to the main sen-
sor, take care of the following. If inserted without care, the connector pins may
bend.
1) Do not insert the connector part aslant.
Good
Connector
2) Do not pull the cables before tightening the M2.6 screws.
Good
Fixed with M2.6 screws
3) Do not insert the connector incorrectly and tighten the M2.6 screws.
Good
No gap
Cable Length (mm)
100
500
1,000
5,000
Not good
Not good
Not good
Connector
1RW ¿[HG ZLWK 0 VFUHZV
Gap
30