Panasonic SF4B V2 Series Instruction Manual page 26

<In case of using dead zoneless mounting bracket (MS-SFB-3) (optional)>
1. Set the spacer attached to the dead zoneless mounting bracket (MS-SFB-3) onto the mount-
ing hole on the side of the top (bottom) end part of this device, and insert the hexagon-sock-
HW KHDG EROW >0 OHQJWK PP @ LQWR WKH KROH
<In case of rear mounting>
Spacer
(Enclosed with MS-SFB-3)
Main body
2. Adjust the hexagon-socket head bolt with the status described in Step 1 to the mounting
KROH RI WKH GHDG ]RQHOHVV PRXQWLQJ EUDFNHW DQG WLJKWHQ DQG ¿[ WKH EUDFNHW
The tightening torque should be 1.2N·m or less.
<In case of rear mounting>
Main body
3. Set the dead zoneless mounting bracket that is ready for setting to the mounting surface us-
ing four hexagon-socket head bolts [M5 (purchase separately)].
<In case of rear mounting>
Hexagon-socket head bolt
[M5 (purchase separately)]
1RWH )RU WKH PRGHOV WKDW WKH LQWHUPHGLDWH VXSSRUWLQJ EUDFNHW MS-SFB-2) is enclosed with, be sure to use the
intermediate supporting bracket (MS-SFB-2). For details, refer to <In case of using intermediate support-
ing bracket (MS-SFB-2) (accessory)>.
25
Hexagon-socket head bolt
>0 OHQJWK PP @
(Enclosed with MS-SFB-3)
Dead zoneless mounting bracket
(MS-SFB-3) (Optional)
Dead zoneless mounting bracket
(MS-SFB-3) (Optional)
Hexagon-socket head bolt
[M5 (Purchase separately)]
Main body
© Panasonic Industriar Devices SUNX Co., Ltd. 2012 ME-SF4BV2-05
<In case of side mounting>
Main body
<In case of side mounting>
Dead zoneless mounting bracket
(MS-SFB-3) (Optional)
Main body
<In case of side mounting>
Spacer
(Enclosed with MS-SFB-3)
Dead zoneless mounting bracket
(MS-SFB-3) (Optional)
Main body