Panasonic SF4B V2 Series Instruction Manual page 28

0RXQWLQJ SURWHFWLRQ EDU VHW 0&6)%+ 7 RSWLRQDO !
1. Mount the protection bar mounting bracket with the accessory two hexagon-socket head
EROWV >0 OHQJWK PP @ 7KH WLJKWHQLQJ WRUTXH VKRXOG EH 1ÂP RU OHVV
2. Mount the protection bar to the protection bar mounting bracket with a hexagon-socket head
EROW >0 OHQJWK PP @ 7KH WLJKWHQLQJ WRUTXH VKRXOG EH 1ÂP RU OHVV
3. If the intermediate supporting bracket is used, mount the bracket with two hexagon-socket
bolts [M5 (purchase separately)] on the mounting surface temporarily. Furthermore, if the
protection bar intermediate supporting bracket (MS-SFB-6) (optional) is used, also mount
the bracket with a hexagon-socket bolt [M8 (purchase separately) on the mounting surface
temporarily.
4. Mount the protection bar mounting bracket with a hexagon-socket bolt [M8 (purchase sepa-
rately)] on the mounting surface temporarily.
5. Adjust the angle of the emitter and the receiver horizontally within the adjustable range of
the elongate hole, and tighten the hexagon-socket bolt [M8 (purchase separately)].
6. Adjust the intermediate supporting bracket and protection bar intermediate supporting brack-
et, and then tighten the hexagon-socket bolt [M8 (purchase separately)].
Hexagon-socket head
bolt with washer
0 /HQJWK PP
Protection mounting bracket
Protection bar
<Reference>
Protection bar mounting bracket has been assembled for rear mounting at the factory shipment and the
parts for side mounting are enclosed as accessories. In case of side mounting, remove the hexagon-
socket head bolt for beam-axis alignment and mount the parts for side mounting.
<At factory shipment>
27
Remove
Hexagon-socket
head bolt for beam-
axis alignment
© Panasonic Industriar Devices SUNX Co., Ltd. 2012 ME-SF4BV2-05
For rear mounting
Main body
Hexagon-socket head bolt
0 OHQJWK PP
Replace
For rear mounting
Protection bar intermediate
supporting bracket
MS-SFB-6 (Optional)
For side mounting