Panasonic SF4B V2 Series Instruction Manual page 12

<Emitter>
It emits light to the receiver facing it. Furthermore, the status of the emitter and the receiver is
indicated on its display section.
<Receiver>
It receives light from the emitter facing it. Simultaneously, it turns ON the control output (OSSD
1 / 2) when the all beam channels receive light from emitter, and it turns OFF the control output
(OSSD 1 / 2) when one or more beam channels are blocked light.
[Exclude when using the muting function (Note 1) or the blanking function (Note 2).]
Besides, the receiver displays its status on the display section.
1RWHV  In case of using the muting function, the following items, 12-core bottom cap cable (SFB-CB05-MU,
6)%&&% 08) (optional), muting sensor and muting lamp are required. Please purchase 12-core bot-
tom cap cable, muting sensor, and muting lamp separately.
2) The blanking function is set by using the handy controller (SFB-HC) (optional). Please purchase the
handy controller separately.
<Beam channel>
The light emitting elements of the emitter and the light receiving elements of the receiver are
placed at the following intervals, 10mm (6)%) 9!), 20mm (6)%+ 9!), and 40mm
(6)%$ 9!).
<M8 rear mounting bracket (optional)>
This bracket allows the emitter / receiver to be mounted at the rear with one M8 hexagon-socket
head bolt. Horizontal angle can be adjusted.
<M8 side mounting bracket (optional)>
This bracket allows the emitter / receiver to be mounted at the side with one M8 hexagon-socket
head bolt. Horizontal angle can be adjusted.
<M5 / M8 360°-rotatable mounting bracket (optional)>
This bracket is to be used for mounting the emitter / receiver. It is installed using two M5 hexa-
gon-socket head bolts or one M8 hexagon-socket head bolt. 360° horizontal angle rotation can
be done.
<M8 360°-rotatable mounting bracket (optional)>
This bracket is to be used for mounting the emitter / receiver. It is installed using one M8 hexa-
gon-socket head bolt. 360° horizontal angle rotation can be done.
<M5 pitch adapter bracket (optional)>
This is used as the mounting bracket when changing over a previous light curtain with a sensing
height of 200 to 750mm to this device. It is installed using two M5 hexagon-socket head bolts.
360° horizontal angle rotation can be done.
<M8 pitch adapter bracket (optional)>
This is used as the mounting bracket when changing over a previous light curtain with a sensing
height of 200 to 750mm to this device. It is installed using one M8 hexagon-socket head bolt.
360° horizontal angle rotation can be done.
<Dead zoneless mounting bracket (optional)>
This bracket is to be used for mounting the emitter / receiver. This is useful for mounting the de-
vice to the limited mounting space.
<Intermediate supporting bracket>
This bracket is to be used for mounting the device having 79 beam channels or more for
6)%) 9!, 40 beam channels or more for 6)%+ 9!, 20 beam channels or more for
6)%$ 9!.
11 © Panasonic Industriar Devices SUNX Co., Ltd. 2012 ME-SF4BV2-05