Re-Starting The Engine Following An Automatic Safety Shutdown - MTU 16V4000M*3 series Operating Instructions Manual

5.5 Re-starting the engine following an automatic safety
shutdown
NOTICE

Re-starting the engine following an automatic safety shutdown.

Risk of severe engine damage!
• Before starting the engine, make sure the root cause of the safety shutdown was eliminated.
• If the root cause cannot be identified or eliminated, contact Service.
Note: • If an engine has been shutdown by a fault (red alarm), the engine may only be re-started when the fault
has been identified and eliminated.
Procedure following an automatic safety shutdown
1. Eliminate fault.
2. If the root cause cannot be identified or eliminated, contact Service.
Important
The function "Overdrive safety system" (if fitted), which is only used in emergency situations, is not affect-
ed.
MS15035/00E 2018-08 | Operation | 97