MTU 16V4000M*3 series Operating Instructions Manual page 205

8. Remove coolant lines (1) from compressor
housing (3).
9. Remove coolant ventilation line (2) from com-
pressor housing (3).
10. Undo screws (1).
11. Remove compressor housing (2).
Cleaning compressor wheel
Note: Do not use wire brushes, scrapers or similar
tools for cleaning!
1. Clean compressor housing with a smooth
paint brush or brush.
2. Clean compressor wheel (2) and bearing
housing (1).
3. Thoroughly remove cleaner from all compo-
nents.
4. Fit new sealing rings between bearing hous-
ing/compressor housing and plug-in sleeves
if necessary.
MS15035/00E 2018-08 | Exhaust Turbocharger | 203