Appendix B Leds; Utm Device Panel Leds - H3C SecPath U200 Series Installation Manual

Appendix B LEDs

UTM device panel LEDs

NOTE:
The LED descriptions of the U200-A, U200-M, and U200-S are similar. This chapter takes the U200-A
as an example.
Figure 45 U200-A LEDs
Table 27 LED description
LED
ACT (yellow)
LINK (green)
(green)
Status
Off
Flashing
Off
On
Off
On
Flashing
Off
On
Slow flashing (1 Hz)
(green)
Fast flashing (8 Hz)
Off
(green)
On
Description
No data is being transmitted or received.
Data is being transmitted or received.
No link is present.
A link is present.
No CF card is present or the CF card is not
recognizable.
A CF card is in position and has passed the power-on
self-test (POST).
The system is accessing the CF card. Do not remove
the CF card in this state.
The device has no power input or is faulty.
The system is faulty.
The device is operating properly.
The application software is being loaded, or the
device is not working.
No interface module is present or the interface
module is faulty.
The interface module is operating properly.
59