H3C SecPath U200 Series Installation Manual page 43

Figure 36 Basic configuration wizard—2/6 (username and password configuration)
2. Configure the system name and user password as described in
Table 8 Configuration items
Item
Sysname
Modify Current User
Password
New Password
Confirm Password
Password Encryption
Configuring services
1. Click Next on the username and password configuration page to enter the service management
page.
Description
Set the system name. The default system name is H3C.
Specify whether to change the login password.
To change the password, enter the new password and confirm it.
The default username and password are both admin.
Set the password encryption mode:
•
Reversible—The firewall encrypts the user password with a reversible algorithm
and saves the password.
•
Irreversible—The firewall encrypts the user password with an irreversible
algorithm and saves the password.
34
Table 8.