H3C SecPath U200 Series Installation Manual page 44

Figure 37 Basic configuration wizard—3/6 (service management)
2. Configure services as described in
Table 9 Configuration items
Item
FTP
Telnet
HTTP
Table
Description
Specify whether to enable the FTP service on the UTM device.
By default, the FTP service is disabled.
Specify whether to enable the Telnet service on the UTM device.
By default, the Telnet service is disabled.
Specify whether to enable the HTTP service on the UTM device.
To enable the HTTP service on the UTM device, select the Enable option and select
the HTTP service port number.
By default, the HTTP service is enabled.
IMPORTANT:
•
If you are using the HTTP service, disabling the HTTP service or changing the
service port number breaks your connection to the UTM device.
•
Make sure no other services are using the specified service port number.
35
9.