Appendix B Leds; Front Panel And Rear Panel Leds; Interface Module Leds - H3C SecPath L5030 Installation Manual

8

Appendix B LEDs

Front panel and rear panel LEDs

Table8-1 Front panel and rear panel LED description
LED
System status LED
Fan status LED
Power module LEDs
Hard disk LEDs
Ethernet copper port
LED (combo interface)
Ethernet fiber port LED
(combo interface)

Interface module LEDs

Table8-2 Interface module LED description
LED
Ready LED
Mark Status
Flashing green (1 Hz)
Flashing green (8 Hz)
SYS
Off
Steady green
FAN0 and FAN1
Off
Steady green
PWR0 and
PWR1
Off
Flashing green
HD0 and HD1 Steady green
Off
Flashing green
10/100/1000BA
Steady green
SE-T
Off
Flashing green
1000BASE-X
Steady green
Off
Mark
READY
8-1
Description
The device is operating correctly.
The system is starting or loading
software.
The device is not powered on or has
failed.
The fan tray is operating correctly.
The fan tray has failed.
The power module is operating
correctly.
The power module is not present or
has failed.
Data is being written in or read from
the hard disk.
The hard disk has finished the
initialization and is operating
correctly.
The hard disk is not present or has
failed.
The port is receiving or sending data.
A link is present.
No link is present.
The port is receiving or sending data
at 1000 Mbps.
A 1000 Mbps link is present.
No link is present.
Status
Flashing green (1 Hz)
Flashing green (8 Hz)
Off
Description
The system is operating
correctly.
The system is starting.
The system has failed.