Table of Contents
Advertisement
Operating Guide
4
Figure 4-10
Typical example of power reading with Noise Source On
14 Press the Noise Source menu key and set it to Noise Source (Off).
15 Monitor the power value which appears in the manual measurement screen.
Figure 4-11 on page
40
shows a typical example of this.
The monitored value is only to be used to indicate if the SNS is switching the
NOTE
Excess Noise "On" and "Off" by showing a change in power value.
Keysight N4000/1/2A Operating and Service Manual
39
Advertisement
Table of Contents
