Table of Contents
Advertisement
Viewing the Smart Noise Source ENR Data
To view the ENR data you need a noise figure analyzer and a diskette.
For an explanation of saving a file to a diskette using the NFA, see the Noise
NOTE
Figure Analyzer User's Guide.
1 Connect the SNS to the NFA Port using the multi-pin 11730 cable, as shown in
Ensure the NFA is set to read the SNS data. See
NOTE
communication"
2 Press the File key.
3 Press the Save menu key.
4 Press the ENR menu key.
5 Press the SNS menu key.
6 Press the Tab key to highlight the Path: C:
7 Press the Select menu key.
8 Press the Select menu key.
9 Press the Enter key. Wait until the data is saved to the diskette.
10 You can now view the data on a PC using, for example, Wordpad as shown in
Keysight N4000/1/2A Operating and Service Manual
Figure 4-2 on page 32.
on page 31 for further information.
Ensure '.' '^UP^' is highlighted.
Ensure the '[-A-]' directory is highlighted.
"Examples"
on page 56.
The data is presented using Comma Separated Values (CSV). This allows you
to view it in a spreadsheet.
ENR File Format
"Operator's check for data
5
55
Advertisement
Table of Contents
