Figure 4-2 Operator's Check Test Setup For Data Communication - Keysight Technologies N4000A SNS Series Operating And Service Manual

4 Operating Guide
Figure 4-2
8 Press the ENR key.
9 Press the ENR Mode menu key and set it to ENR Mode (Table).
10 Press the Common Table menu key and set it to Common Table (On).
11 Press the ENR Table menu key.
12 Press the Ed it Table menu key and press the Clear Table menu key if there is
32
Operator's check test setup for data communication
data in the ENR Table.
You are prompted to press this key again. This feature ensures you do not
accidentally clear a valid Frequency list table. Press the Clear Table menu key
again. Figure 4-3 on page 33 shows a typical cleared ENR table.
Keysight N4000/1/2A Operating and Service Manual