Figure 4-4 A Typical Enr Table After Data Entry - Keysight Technologies N4000A SNS Series Operating And Service Manual

4 Operating Guide
Figure 4-4
Operator's check for T
The following procedure checks that the SNS can transfer the T
NFA.
1 Remove any cables from the NFA input and SNS drive.
2 Press the Preset key. Wait until the preset routine is complete before
The preset condition used is the NFA default of Preset (Factory).
NOTE
3 Press the ENR key.
4 Press the Tcold menu key.
34
A typical ENR table after data entry
proceeding.
communication
cold
Keysight N4000/1/2A Operating and Service Manual
data to the
cold