Table of Contents
Advertisement
2
Installation
Handling Precautions
The diode module is static sensitive and can be damaged or the calibration
CAUTION
can be altered.
Do not rotate the body of the SNS series smart noise source when
CAUTION
connecting to the noise figure analyzer, or internal damage may result.
Do not drop the SNS series smart noise source. Dropping can damage the
CAUTION
unit or alter the calibration.
Proper connector care is essential. See
more information.
Initial Inspection
1 Unpack and inspect the shipping container and its contents thoroughly to
2 If the contents are damaged or defective, contact your nearest Keysight
18
ensure that nothing was damaged during shipment. If the shipping container
or cushioning material is damaged, the contents should be checked both
mechanically and electrically.
– Check for mechanical damage such as scratches or dents.
– Procedures for checking electrical performance are given under
check"
on page 31.
Technologies Service and Support Office. Refer to
Support"
on page 6 of this manual. Keysight Technologies will arrange for
repair or replacement of the damaged or defective equipment. Keep the
shipping materials for the carrier's inspection.
"Operator's Maintenance"
Keysight N4000/1/2A Operating and Service Manual
on page 41 for
"Operator's
"Sales and Technical
Advertisement
Table of Contents
