Operating Guide
4
5 Connect the SNS to the NFA Port using the multi-pin 11730 cable, as shown in
Figure 4-5 on page 35.
Figure 4-5
Operator's check test setup for T
communication
cold
6 Press the SNS Tcold menu key and set it to SNS Tcold (Off).
7 Press the User Tcold menu key and set it to User Tcold (On).
The value displayed in the User Value menu key, typically 296.50 K. Figure 4-6
NOTE
on page
36
shows a typical NFA menu map.
Keysight N4000/1/2A Operating and Service Manual
35