[Others] Menu - Panasonic AG-CX350 Operating Instructions Manual

f When [FREQUENCY] is [59.94Hz] and [FILE FORMAT] is [AVCHD]
The items that can be set are as follows.
- [1080-59.94p/AVCHD PS], [1080-59.94i/AVCHD PH], [1080-59.94i/AVCHD HA], [1080-23.98p/AVCHD PH], [720-59.94p/AVCHD PM], [480-59.94i/
AVCHD SA]
(Factory setting: [1080-59.94i/AVCHD PH])
[ASPECT]
Sets the aspect ratio of the video to record in the SD signal format (480i and 576i).
[4:3]
[16:9]
(Factory setting: [4:3])
[SUPER SLOW]
Sets the super slow recording. Enable this setting to shoot slow motion video.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
@
NOTE
t This setting is fixed to [OFF] when anything other than the [SYSTEM] menu → [FILE FORMAT] → [MOV] is set.
t This setting is fixed to [OFF] when the [SYSTEM] menu → [REC FORMAT] is set to anything other than 1920×1080.
t This setting is fixed to [OFF] when the [SYSTEM] menu → [REC FORMAT] is set to 59.94i/50.00i.
[SHOOTING MODE]
Sets the shooting mode according to the shooting environment.
[NORMAL]
[HIGH SENS.]
(Factory setting: [NORMAL])

[OTHERS] menu

Configures the settings for writing/loading/initializing user files to the internal memory and other settings of the camera.
[FILE]
Saves and loads the setting data.
For the saving and loading target, refer to "Target items for scene file/setup file/initialization" (page 102).
For details about saving and loading, refer to "Handling setting data" (page 109).
[SCENE FILE(SD CARD)]
Loads or saves scene files on a memory card.
[LOAD]
[SAVE]
[SAVE AS]
[SETUP FILE(SD CARD)]
Loads or saves setup files on a memory card.
[LOAD]
[SAVE]
[SAVE AS]
[SETUP FILE(MEMORY)]
Loads/saves/initializes setup files in the internal memory of the camera.
[LOAD]
[SAVE]
[INITIALIZE]
Chapter 4 Operation — Menu settings
Records using standard 4:3 mode. Cut both the left and right edges.
Camera images are compressed in the horizontal direction when recording. Replaying recorded images on a TV monitor that
supports a wide screen will convert the images to an aspect ratio of 16:9.
Selects the shooting mode for an environment at normal brightness.
Selects high-sensitivity. (Appropriate when shooting in a dark environment.) [H.SENS.] is displayed in the camera image
screen.
Selects and loads the scene file saved on the memory card into the camera.
Can select if all of the scene files ([F1:] to [F6:]) are loaded, or individually loaded.
The setting values of the current scene file ([F1:] to [F6:]) are overwritten to the file selected from the list of scene files saved
in the memory card.
The setting values of the current scene file ([F1:] to [F6:]) is saved to the memory card as a new scene file by entering the file
name.
Selects the setup file saved on the memory card to load on the camera.
Overwrites the file selected in the list of the setup files saved on the memory card with the current setting values of the
camera.
Enter a file name to save the current setting values in the camera as a new setup file in the memory card.
Loads setup data saved on the memory.
Saves the setup data to the memory.
Restores the factory settings from the current settings for the menus in the setup data.
– 96 –