Menu Settings; [Thumbnail] Menu; [Camera] Menu - Panasonic AG-CX350 Operating Instructions Manual

Menu settings

[THUMBNAIL] menu

Performs confirmation or deleting of the recording clip.
This menu can be set when the thumbnail screen is displayed.
[PLAYBACK]
Sets the playback of recorded clips.
The clip selection is generally [ALL SLOT] when toggling the thumbnail screen from the camera image screen.
[CLIP SEL]
Selects a clip to be displayed on the thumbnail screen.
[ALL SLOT]
[SLOT1]
[SLOT2]
[SAME FORMAT]
(Factory setting: [ALL SLOT])
[RESUME PLAY]
Select if the playback is to start from the position the playback has stopped or not.
[ON]
[OFF]
(Factory setting: [OFF])
[CLIP]
The clip can be protected or copied to a different memory card.
[PROTECT]
[DELETE]
[COPY]
[INFORMATION]
@
NOTE
t The clip recorded in MOV format cannot be copied.
[DISPLAY]
Sets the display of the thumbnail screen.
[DATA]
Selects the content to be displayed in the time code display area.
[START TC]
[CLIP NAME]
(Factory setting: [START TC])

[CAMERA] menu

Sets the basic camera function.
This menu cannot be set when the thumbnail screen is displayed.
[SW MODE]
[LOW GAIN]
Sets the gain value to be assigned to the <L> position of the <GAIN> switch. (The negative value of gain can be set only when [SYSTEM] menu →
[SHOOTING MODE] → [HIGH SENS.] is set.)
The items that can be set are as follows.
f [−3dB]...[18dB]
(Factory setting: [0dB])
Chapter 4 Operation — Menu settings
Displays the clips recorded on all the memory cards in each card slot.
Displays only the clips recorded on the memory card in card slot 1.
Displays only the clips recorded on the memory card in card slot 2.
Displays only the clips recorded in the same format as the system format.
Clips recorded in the same format means that each item of [FREQUENCY], [FILE FORMAT], and [REC FORMAT] in the
[SYSTEM] menu matches the current setting status.
Plays back from the position where playback has stopped.
Always starts the playback from the beginning of the clip.
[SELECT]
[ALL]
[SELECT]
[ALL]
[SELECT]
Displays the time code value at the start of the recording.
Displays clip names.
Protect the clip so it is not mistakenly deleted.
Select the clip to protect, and set the protect.
Deletes all the clips displayed in the thumbnail screen.
The clip that is not displayed in the thumbnail screen is not deleted.
Select the clip to delete, and delete it.
Copies all clips to a different memory card.
Selects the clip to copy, and copies the clip to a different memory card.
Displays the detailed information of the clip.
– 64 –