Panasonic AG-CX350 Operating Instructions Manual page 162

AUDIO screen
Displays the audio input/output settings and the audio level meter.
[AUDIO]
[SELECT]
[LINE/MIC]
[LEVEL]
[LIMITER]
[LOWCUT]
SWITCH screen
Displays the function assigned to the USER switch, <GAIN> switch, and <WHITE BAL> switch as well as the setting value.
[USER SW]
[OTHER ASSIGN]
NETWORK screen
Displays the settings of the network function.
[NETWORK]
Chapter 7 Output and Screen Display — Screen status display
Item
[AUDIO OUT]
[CH1/2]
[CH1/2]
[CH1/2]
[CH1/2]
[CH1/2]
Item
[1] - [7]
[GAIN L]
[GAIN M]
[GAIN H]
[S.GAIN]
[WHITE BAL A]
[WHITE BAL B]
[WHITE BAL PRST]
Item
[DEVICE SEL]
[NETWORK FUNC]
[STRM FORMAT]
[STRM DATA TYPE]
[IP REMOTE]
[IP ADDRESS]
Displays the audio channel and the format output from the <AV OUT> terminal,
headphones terminal, and the built-in speaker with [CH1]/[CH2]/[CH1/2
STEREO]/[CH1/2 MIX].
The audio to be recorded in each channel is displayed with [INT(L)]/[INT(R)]/
[INPUT1]/[INPUT2].
The audio input signal of each channel is displayed with [LINE]/[MIC]/
[MIC+48V].
Displays [---] when [INT(L)] or [INT(R)] is selected as the audio to be recorded.
Displays the adjustment method of the recording level of the audio for each
channel with [AUTO]/[MANU].
Displays enable/disable of limiter for each channel with [ON]/[OFF].
Displays [---] when the adjustment method of the recording level of the audio is
set to [AUTO].
Displays enable/disable of low-cut filter for each channel with [ON]/[OFF].
Displays the function assigned to <USER 1> through <USER 7> buttons.
Displays the gain value assigned to the <L> position of the <GAIN> switch.
Displays the gain value assigned to the <M> position of the <GAIN> switch.
Displays the gain value assigned to the <H> position of the <GAIN> switch.
Displays the list of gain values assigned as a super gain.
Displays the color temperature assigned to the <A> position of the <WHITE
BAL> switch.
Displays [ATW] when the auto tracking white balance function is assigned.
Displays the color temperature assigned to the <B> position of the <WHITE
BAL> switch.
Displays [ATW] when the auto tracking white balance function is assigned.
Displays the color temperature assigned to the <PRST> position of the
<WHITE BAL> switch.
Displays [ATW] when the auto tracking white balance function is assigned.
Color temperature and [VAR] are displayed when [VAR] is assigned.
Displays the device that connects an external equipment (computer, etc.) and
the camera with [LAN]/[WLAN]/[OFF].
Displays the network function of the camera with [STREAMING]/[NDI|HX]/
[OFF].
Displays the streaming format.
It is not displayed when set to the [NETWORK] menu → [NETWORK FUNC]
→ [OFF].
Displays the type of the streaming connection information.
It is not displayed when set to anything other than the [NETWORK] menu →
[NETWORK FUNC] → [STREAMING].
Displays enable/disable of the IP remote function with [ENABLE]/[DISABLE].
Displays the IP address in use.
It is not displayed when there is no IP address in use.
– 162 –
Description
Description
Description