Panasonic AG-CX350 Operating Instructions Manual page 65

[MID GAIN]
Sets the gain value to be assigned to the <M> position of the <GAIN> switch.
The items that can be set are as follows.
f [−3dB]...[18dB]
(Factory setting: [6dB])
[HIGH GAIN]
Sets the gain value to be assigned to the <H> position of the <GAIN> switch.
The items that can be set are as follows.
f [−3dB]...[18dB]
(Factory setting: [12dB])
[SUPER GAIN]
Sets the super gain to be assigned to the USER button.
Toggles [24dB], [30dB], [36dB], and the normal gain in order each time the USER button is pressed or the USER button icon is touched when set to
[ALL].
The items that can be set are as follows.
f [24dB], [30dB], [36dB], [ALL]
(Factory setting: [36dB])
[O.I.S.]
Enables/disables the optical image stabilizer function.
If [O.I.S.] is assigned to the USER button, pressing the USER button switches [ON]/[OFF].
For details about optical image stabilizer, refer to "Optical image stabilizer function" (page 135).
[ON]
[OFF]
(Factory setting: [ON])
[HYBRID O.I.S.]
Enables/disables the hybrid optical image stabilizer function.
For details about optical image stabilizer, refer to "Optical image stabilizer function" (page 135).
[ON]
[OFF]
(Factory setting: [ON])
[O.I.S. MODE]
Switches the operation mode of the optical image stabilizer function.
[NORMAL]
[PAN/TILT]
[STABLE]
(Factory setting: [NORMAL])
[ATW]
Assigns the auto tracking white balance function to the <WHITE BAL> switch.
The items that can be set are as follows.
f [Ach], [Bch], [PRE], [OFF]
(Factory setting: [OFF])
[ATW SPEED]
Sets the control speed of the auto tracking white balance function.
The items that can be set are as follows.
f [FAST], [NORMAL], [SLOW]
(Factory setting: [NORMAL])
[ATW TARGET R]
Finely adjusts the Rch output for convergence with the auto tracking white balance operation.
The items that can be set are as follows.
f [−10]...[10]
(Factory setting: [0])
[ATW TARGET B]
Finely adjusts the Bch output for convergence with the auto tracking white balance operation.
The items that can be set are as follows.
f [−10]...[10]
(Factory setting: [0])
Chapter 4 Operation — Menu settings
Enables the optical image stabilizer function.
Disables the optical image stabilizer function.
Enables the hybrid optical image stabilizer function.
Disables the hybrid optical image stabilizer function.
Specifies the standard setting for a good balance of correction for large and small camera shake.
Specifies a setting appropriate for shooting that uses a lot of panning and tilting of the camera.
Specifies a setting appropriate for fixing a composition to shoot a subject.
– 65 –