Connection Function Via The <Usb3.0 Device>/<Usb2.0; Host> Terminal; Connection With A Computer In Card Reader Mode - Panasonic AG-CX350 Operating Instructions Manual

Chapter 8 Connecting to External Devices — Connection function via the <USB3.0 DEVICE>/<USB2.0 HOST> terminal
Connection function via the <USB3.0 DEVICE>/<USB2.0 HOST> terminal

Connection with a computer in card reader mode

Connect the camera to a computer via the USB type C cable to use the camera as a card reader for the memory card.
Connecting to a computer
1
Connect the USB cable to the <USB3.0 DEVICE> terminal.
2
Select the [OTHERS] menu → [USB DEVICE] → [CARD READER MODE].
3
Select [YES] when the confirmation message is displayed.
During USB connection, [USB connected. Please operate via PC.] is displayed in the center of the viewfinder or LCD monitor.
If the USB connection is being moved or it is not connected properly, [Connect this unit to PC using USB cable.] is displayed.
4
Exit the card reader mode.
There are following methods.
f Turn the power switch of the camera to < h > (standby).
f Press the <EXIT> button.
After exiting the card reader mode, returns to camera shooting status in approximately five seconds.
@
NOTE
t A USB type C cable is not supplied with this camera. Prepare a commercial USB type C cable (double-shielded for noise suppression).
t Using a USB cable within 1.5 m as much as possible is recommended.
t When connecting the camera to a computer via USB, ensure that no other device is connected to the computer via USB.
t Do not remove the memory card when connecting the camera via USB.
t The card access lamp while connected to USB will turn off unless accessing.
t When the camera is operating in the card reader mode, camera shooting, recording/playback operation, or thumbnail operation of the clip is not
allowed.
t When the camera is operating in the card reader mode, the remaining recording capacity and status of the memory card are not displayed. Also,
video/audio cannot be output or displayed.
t The LCD monitor lights up by touching the monitor if it has turned out to save energy.
USB type C cable (optional)
Type C
– 166 –
Computer