Panasonic AG-CX350 Operating Instructions Manual page 71

[Q PHASE]
Sets the phase of the area that applies the skin tone related to the Q axis.
The items that can be set are as follows.
f [−128]...[127]
[RB GAIN CONTROL SETTING]
[R GAIN AWB PRE]
Sets the Rch gain when the <WHITE BAL> switch is at the <PRST> position.
The items that can be set are as follows.
f [−200]...[200]
[B GAIN AWB PRE]
Sets the Bch gain when the <WHITE BAL> switch is at the <PRST> position.
The items that can be set are as follows.
f [−200]...[200]
[R GAIN AWB A]
Sets the Rch gain when the <WHITE BAL> switch is at the <A> position.
The items that can be set are as follows.
f [−200]...[200]
[B GAIN AWB A]
Sets the Bch gain when the <WHITE BAL> switch is at the <A> position.
The items that can be set are as follows.
f [−200]...[200]
[R GAIN AWB B]
Sets the Rch gain when the <WHITE BAL> switch is at the <B> position.
The items that can be set are as follows.
f [−200]...[200]
[B GAIN AWB B]
Sets the Bch gain when the <WHITE BAL> switch is at the <B> position.
The items that can be set are as follows.
f [−200]...[200]
[AWB A GAIN OFFSET]
Sets the Rch gain and Bch gain when the <WHITE BAL> switch is at the <A> position and automatic white balance is performed.
[ON]
[OFF]
[AWB B GAIN OFFSET]
Sets the Rch gain and Bch gain when the <WHITE BAL> switch is at the <B> position and automatic white balance is performed.
[ON]
[OFF]
[COLOR TEMP Ach SETTING]
[COLOR TEMP]
Displays the color temperature when the <WHITE BAL> switch is at the <A> position and automatic white balance is working, or when it is preset.
Also, in automatic white balance operation, the color temperature can be changed by changing the output balance of Rch and Bch.
The items that can be set are as follows.
f [2000K]...[15000K]
[R GAIN]
Displays the output of Rch when the <WHITE BAL> switch is at the <A> position and automatic white balance is working, or when it is preset.
In the automatic white balance operation, the color can also be changed on the Rch axis by changing the output of Rch.
The items that can be set are as follows.
f [−400]...[400]
[B GAIN]
Displays the output of Bch when the <WHITE BAL> switch is at the <A> position and automatic white balance is working, or when it is preset.
In automatic white balance operation, the color can also be changed on the Bch axis by changing the output of Bch.
The items that can be set are as follows.
f [−400]...[400]
Chapter 4 Operation — Menu settings
Keeps the values set in [R GAIN AWB A] and [B GAIN AWB A].
Sets the value of Rch gain and Bch gain to [0].
Keeps the values set in [R GAIN AWB B] and [B GAIN AWB B].
Sets the value of Rch gain and Bch gain to [0].
– 71 –