Table of Contents
Advertisement
Menu – [OTHERS] menu
[OTHERS] menu
Configures the settings for writing/loading/initializing user files to the internal memory and other settings of the unit.
[FILE]
Saves and loads the setting data.
•
For the saving and loading target (
•
For the saving/loading scene file (
[SCENE FILE(SD CARD)]
Loads or saves scene files on a memory card.
[LOAD]
[SAVE]
[SAVE AS]
[SETUP FILE(SD CARD)]
Loads or saves setup files on a memory card.
[LOAD]
[SAVE]
[SAVE AS]
[SETUP FILE(MEMORY)]
Loads/saves/initializes setup files in the internal memory of the unit.
[LOAD]
[SAVE]
[INITIALIZE]
[SLOT FOR LOAD/SAVE]
Sets the card slot to load and save the scene file, setup file, and streaming setting file.
The items that can be set are as follows.
≥[SLOT1], [SLOT2]
(Factory setting: [SLOT1])
[LED]
[TALLY LED]
Sets whether the tally lamps are to illuminate or not.
[FRONT]
[REAR]
[BOTH]
[OFF]
(Factory setting: [BOTH])
[REC TALLY]
Sets whether the tally lamps are to illuminate or not when recording with the camera.
The items that can be selected are as follows.
≥[ON], [OFF]
(Factory setting: [ON])
Target items for scene file/setup file/initialization:
Saving the scene file:
Selects and loads the scene file saved on the memory card into the unit.
Can select if all of the scene files ([F1:] to [F6:]) are loaded, or individually loaded.
The setting values of the current scene file ([F1:] to [F6:]) are overwritten to the file selected from the list of
scene files saved in the memory card.
The setting values of the current scene file ([F1:] to [F6:]) is saved to the memory card as a new scene file by
entering the file name.
Selects the setup file saved on the memory card to load on the unit.
The unit will automatically restart after loading.
Overwrites the file selected in the list of the setup files saved on the memory card with the current setting
values of the unit.
Enter a file name to save the current setting values in the unit as a new setup file in the memory card.
Loads setup file saved on the memory.
The unit will automatically restart after loading.
Saves the setup file to the memory.
Restores the factory settings from the current settings for the menus in the setup file.
The unit will automatically restart after execution.
The front tally lamp will illuminate.
The rear tally lamp will illuminate.
Both the front and rear tally lamps will illuminate.
The tally lamps will not illuminate.
137,
Loading the scene file:
122
129)
138)
Advertisement
Table of Contents
