Panasonic AG-CX350 Operating Instructions Manual page 92

Memory card camera-recorder
Hide thumbs Also See for AG-CX350:
Table of Contents

Advertisement

The items that can be set are as follows.
f [CAMERA], [RECEIVER]
(Factory setting: [RECEIVER])
[CONNECTION INFO.]
Selects the internal memory of the camera or the memory card as the reference location for the transfer destination when starting a stream with the
operation of the camera.
The items that can be set are as follows.
f [MEMORY], [SD CARD]
(Factory setting: [MEMORY])
[RECEIVER URL]
Enter the destination URL in the rtmp://(IP address):(port number)/(path) format. (511 characters or less)
[LOAD (SD CARD)]
The settings file is imported from the memory card and reflected in the menu when [CONNECTION INFO.] is [SD CARD].
The items that can be selected are as follows.
f [YES], [NO]
[SAVE (SD CARD)]
Encrypts and saves the information of the destination URL to the memory card.
The items that can be selected are as follows.
f [YES], [NO]
[START]
Starts streaming.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[NDI|HX]
Performs settings related to NDI|HX.
[ACTIVATION]
Displays whether the NDI|HX function is enabled. (Cannot be changed)
[‑‑]
[NDI|HX]
[STREAMING FORMAT]
Specifies the streaming format.
The items that can be set are as follows.
f When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/50p
- [1920×1080-50fps 24M], [1920×1080-50fps 16M], [1920×1080-50fps 10M], [1920×1080-50fps 8M], [1280×720-50fps 14M], [1280×720-50fps 10M],
[1280×720-50fps 6M]
(Factory setting: [1920×1080-50fps 10M])
f When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/59.94p
- [1920×1080-60fps 24M], [1920×1080-60fps 16M], [1920×1080-60fps 10M], [1920×1080-60fps 8M], [1280×720-60fps 14M], [1280×720-60fps 10M],
[1280×720-60fps 6M]
(Factory setting: [1920×1080-60fps 10M])
f When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/50i or 1080/25p
- [1920×1080-25fps 14M], [1920×1080-25fps 10M], [1920×1080-25fps 6M], [1280×720-25fps 8M], [1280×720-25fps 4M], [1280×720-25fps 2M]
(Factory setting: [1920×1080-25fps 10M])
f When [FILE FORMAT] is [MOV] and [REC FORMAT] is 1080/59.94i or 1080/29.97p
- [1920×1080-30fps 14M], [1920×1080-30fps 10M], [1920×1080-30fps 6M], [1280×720-30fps 8M], [1280×720-30fps 4M], [1280×720-30fps 2M]
(Factory setting: [1920×1080-30fps 10M])
@
NOTE
t Cannot be set when [FILE FORMAT] is set to [AVCHD] or [REC FORMAT] is set to UHD or 1080/23.98p.
[CLEAR ACTIVATION]
Clears the activation license information that is saved.
The items that can be selected are as follows.
f [YES], [NO]
[LAN PROPERTY]
Performs settings related to the wired LAN.
[MAC ADDRESS]
Displays the MAC address for the wired LAN of the camera. (Cannot be changed)
Chapter 4 Operation — Menu settings
Not active.
Active.
– 92 –

Advertisement

Table of Contents
loading

Table of Contents