Table of Contents
Advertisement
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
@
NOTE
t This setting is fixed to [OFF] when anything other than the [SYSTEM] menu → [FILE FORMAT] → [MOV] is set.
t This setting is fixed to [OFF] when the [SYSTEM] menu → [REC FORMAT] is set to anything other than 1920×1080.
t This setting is fixed to [OFF] when the [SYSTEM] menu → [REC FORMAT] is set to 59.94i/50.00i.
[SHOOTING MODE]
Sets the shooting mode according to the shooting environment.
[NORMAL]
[HIGH SENS.]
(Factory setting: [NORMAL])
@
NOTE
t The setting is fixed to [NORMAL] when the [CAMERA] menu → [SW MODE] → [GAIN/ISO MODE] is set to [ISO].
[COLOR SETTING]
Sets the color of the recording image (entire camera system).
[NORMAL]
[V‑Log]
(Factory setting: [NORMAL])
[OTHERS] menu
Configures the settings for writing/loading/initializing user files to the internal memory and other settings of the camera.
[FILE]
Saves and loads the setting data.
For the saving and loading target, refer to "Target items for scene file/setup file/initialization" (page 110).
For details about saving and loading, refer to "Handling setting data" (page 117).
[SCENE FILE(SD CARD)]
Loads or saves scene files on a memory card.
[LOAD]
[SAVE]
[SAVE AS]
[SETUP FILE(SD CARD)]
Loads or saves setup files on a memory card.
[LOAD]
[SAVE]
[SAVE AS]
[SETUP FILE(MEMORY)]
Loads/saves/initializes setup files in the internal memory of the camera.
[LOAD]
[SAVE]
[INITIALIZE]
[SLOT FOR LOAD/SAVE]
Sets the card slot to load and save the scene file, setup file, and streaming setting file.
The items that can be set are as follows.
f [SLOT1], [SLOT2]
(Factory setting: [SLOT1])
Chapter 4 Operation — Menu settings
Selects the shooting mode for an environment at normal brightness.
Selects high-sensitivity. (Appropriate when shooting in a dark environment.) [H.SENS.] is displayed in the camera image
screen.
Adjusts the detailed image quality on the camera.
Sets the gamma curve that obtains gradation and wider latitude (exposure range). Color grading process is required after
recording.
Selects and loads the scene file saved on the memory card into the camera.
Can select if all of the scene files ([F1:] to [F6:]) are loaded, or individually loaded.
The setting values of the current scene file ([F1:] to [F6:]) are overwritten to the file selected from the list of scene files saved
in the memory card.
The setting values of the current scene file ([F1:] to [F6:]) is saved to the memory card as a new scene file by entering the file
name.
Selects the setup file saved on the memory card to load on the camera.
Overwrites the file selected in the list of the setup files saved on the memory card with the current setting values of the
camera.
Enter a file name to save the current setting values in the camera as a new setup file in the memory card.
Loads setup data saved on the memory.
Saves the setup data to the memory.
Restores the factory settings from the current settings for the menus in the setup data.
– 104 –
Advertisement
Table of Contents
