Panasonic AG-CX350 Operating Instructions Manual page 67

[Y GET]
[FOCUS/IRIS]
[FOCUS/Y GET]
(Factory setting: [INHIBIT])
[IR REC]
Enables/disables the IR recording.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[AUTO SW]
[A.IRIS]
Enables/disables the auto iris control.
[ON]
[OFF]
(Factory setting: [ON])
[AGC]
Sets the auto gain control operations when [ON] is selected in [A.IRIS].
[ON]
[OFF]
(Factory setting: [ON])
[AGC LIMIT]
Sets the maximum gain value during [AGC] operation.
The items that can be set are as follows.
f [3dB], [6dB], [12dB], [18dB]
(Factory setting: [6dB])
[AGC POINT]
Sets the F value to switch control from auto iris to [AGC] during [AGC] operation.
The items that can be set are as follows.
f [F4.0], [F5.6]
(Factory setting: [F4.0])
[A.SHUTTER]
Sets the auto shutter control operations when [ON] is selected in [A.IRIS].
[ON]
[OFF]
(Factory setting: [ON])
[A.SHUTTER LIMIT]
Sets the maximum shutter value during [A.SHUTTER] operation.
The items that can be set are as follows.
f [1/100], [1/120], [1/250]
(Factory setting: [1/250])
[A.SHUTTER POINT]
Sets the F value to switch control from auto iris to [A.SHUTTER] during [A.SHUTTER] operation.
The items that can be set are as follows.
f [F8.0], [F9.6]
(Factory setting: [F8.0])
[ATW]
Sets the operations of the auto tracking white balance function.
[ON]
[OFF]
(Factory setting: [ON])
Chapter 4 Operation — Menu settings
Assigns the brightness display function.
Assigns the simultaneous operation of the [FOCUS] and [IRIS].
Assigns the simultaneous operation of the [FOCUS] and [Y GET].
Performs the auto iris control operation when in auto mode. The <IRIS> button does not work.
Does not perform the auto iris control operation when in auto mode.
This activates the iris control selected with the <IRIS> button.
Performs the operation of the [AGC] function that automatically adjusts camera gain when in auto mode.
Does not perform the operation of the [AGC] function that automatically adjusts camera gain when in auto mode.
Performs the operation of the auto shutter when in auto mode.
Does not perform the operation of the auto shutter when in auto mode.
Activates the auto tracking white balance function when in auto mode. The [ATW] function cannot be switched between
enabled and disabled with the <WHITE BAL> switch or the USER buttons.
However, if [ATW LOCK] is assigned to the USER button, the white balance value can be fixed with the USER button.
Does not perform the [ATW] function operation in auto mode. Performs the operation of the white balance function selected
with the <WHITE BAL> switch.
– 67 –