Panasonic AG-CX350 Operating Instructions Manual page 75

The items that can be set are as follows.
f [−63]...[63]
[Yl] ([PHASE])
Corrects the yellow hue.
The items that can be set are as follows.
f [−63]...[63]
[Yl-Yl-R] ([SAT])
Corrects the color saturation between yellow and "colors between yellow and red".
The items that can be set are as follows.
f [−63]...[63]
[Yl-Yl-R] ([PHASE])
Corrects the hue between yellow and "colors between yellow and red".
The items that can be set are as follows.
f [−63]...[63]
[Yl-R] ([SAT])
Corrects the color saturation between yellow and red.
The items that can be set are as follows.
f [−63]...[63]
[Yl-R] ([PHASE])
Corrects the hue between yellow and red.
The items that can be set are as follows.
f [−63]...[63]
[Yl-R-R] ([SAT])
Corrects the color saturation between "colors between yellow and red" and red.
The items that can be set are as follows.
f [−63]...[63]
[Yl-R-R] ([PHASE])
Corrects the hue between "colors between yellow and red" and red.
The items that can be set are as follows.
f [−63]...[63]
[MASTER PED]
Sets the master pedestal.
The items that can be set are as follows.
f [−200]...[200]
[RGB BLACK CONTROL SETTING]
[R PED]
Sets the Rch pedestal level.
The items that can be set are as follows.
f [−100]...[100]
[G PED]
Sets the Gch pedestal level.
The items that can be set are as follows.
f [−100]...[100]
[B PED]
Sets the Bch pedestal level.
The items that can be set are as follows.
f [−100]...[100]
[PEDESTAL OFFSET]
Sets the Rch, Gch, and Bch pedestal levels after adjusting the automatic black balance.
[ON]
[OFF]
[GAMMA MODE SEL]
Selects the gamma mode.
[HD]
Chapter 4 Operation — Menu settings
Keeps each of the values set in [R PED], [G PED], and [B PED].
Sets the pedestal level of Rch, Gch, and Bch to [0].
Sets the gamma characteristics for HD (High Definition).
– 75 –