Connection Function Via The Usb Terminal; Connection With A Computer In Card Reader Mode - Panasonic AG-X2 Operating Instructions Manual

Connecting to External Devices – Connection function via the USB terminal

Connection function via the USB terminal

≥Connection with a computer in card reader mode: 263

≥Operating environment (mass storage): 265
Connection with a computer in card reader mode
Connect the unit to a computer via the USB cable to use the unit as a card reader for the memory card.
•
This unit supports USB3.1 Gen1.
Connecting to a computer
(A) USB terminal (type C)
(B) USB cable (commercially-available)
(C) Computer
1
Connect the USB cable to the USB terminal.
2
Select the [NETWORK] menu
* Available for setting when using
3
Select the [OTHERS] menu
During USB connection, [USB connected. Please operate via PC.] is displayed in the center of the viewfinder or LCD
monitor.
If the USB connection is being moved or it is not connected properly, [Connect this unit to PC using USB cable.] is
displayed.
•
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on.
4
Exit the card reader mode.
There are following methods.
•
Turn off the unit.
•
Press the <EXIT> button.
•
Press the multidial.
•
Touch [ ]
After exiting the card reader mode, returns to camera shooting status in approximately 5 seconds.
(A)
(B)
[DEVICE SEL]
.
[USB DEVICE]
(C)
*
[LAN] , [WLAN] or [OFF].
[CARD READER MODE]
263
[YES].