Controls; Machine Controls - Toro 34215 Operator's Manual

1. Fuel-tank cap
2. Battery

Controls

Machine Controls

Steering Control
The steering control is located behind the control
console (see Figure 6).
•
Move the steering control to the right or left to
steer the machine to the right or left respectively.
•
Moving the steering control to the center allows
the machine to steer straight.
Figure 5
3. Sprayer-tank cap
4. Platform
1. Control console
2. Steering control
g033351
3. Rear reference bar
4. Motion-control lever
(Neutral position)
Motion-Control Lever
The motion-control lever, located in the center of the
steering control, controls the forward and reverse
motion of the machine (see
•
Move the motion-control lever forward or backward
to drive the machine respectively.
Note:
The machine speed is proportional to the
amount that you move the motion-control lever.
•
When you move the motion-control lever to the
center position, the machine should stop.
Note:
When you release the motion-control lever,
it should return to the N
Important:
not return to the N
release it, contact an Authorized Service
Dealer.
11
Figure 6
5. Front reference bar
6. Reverse
7. Forward
Figure 6).
position.
EUTRAL
If the motion-control lever does
position when you
EUTRAL
g033345