Toro 34215 Operator's Manual page 74

Problem
The indicator light above the impeller
On/Off switch is illuminated or flashing.
The indicator light above the sprayer
switch is illuminated or flashing.
Possible Cause
1. The indicator light is flashing at a slow,
constant rate and the —impeller motor
speed is not adjustable (locked).
2. The indicator light flashes for 2
seconds and then pulses 2 times—The
electrical system for the impeller motor
is over current.
3. The indicator light flashes fast and
constant and then pulses 4 times—the
electrical system for the machine is
under voltage.
4. The indicator light flashes fast and then
pulses 5 times—the electrical system
for the machine is over voltage.
1. The indicator light flashes for 2
seconds and then pulses 2 times—The
electrical system for the sprayer pump
is over current.
2. The indicator light flashes fast and
constant and then pulses 4 times—the
electrical system for the machine is
under voltage.
3. The indicator light flashes fast and then
pulses 5 times—the electrical system
for the machine is over voltage.
74
Corrective Action
1. While the impeller motor is running,
press and hold the impeller On/Off
switch for 5-seconds to reset impeller
motor speed control; or shut off the
engine, and then start the engine;
and/or Contact an Authorized Service
Dealer.
2. Check the electrical connections for
damage and corrosion; inspect the
impeller for blockage; and/or contact
an Authorized Service Dealer.
3. Run the engine at high idle with all
spreader function turned off to charge
the battery until the flashing indicator
light resets; check the condition of the
battery; check the electrical harness for
loose or damaged connections; check
the charging system of the engine for
electrical output; and/or contact an
Authorized Service Dealer.
4. check charging system of the engine
for electrical output and/or contact an
Authorized Service Dealer.
1. Check the electrical connections
for damage and corrosion; inspect
the sprayer pump for blockage and
drainage; and/or contact an Authorized
Service Dealer.
2. Run engine at high idle with the
sprayer function turned off to charge
the battery until the flashing indicator
light resets; check the condition of the
battery; check the electrical harness for
loose or damaged connections; check
the charging system of the engine for
electrical output; and/or contact an
Authorized Service Dealer.
3. check the charging system of the
engine for electrical output and/or
contact an Authorized Service Dealer.