Safety; General Safety; Safety And Instructional Decals - Toro 34215 Operator's Manual

Safety

The following instructions are from ANSI standard
B71.4-2017.

General Safety

This product is capable of causing personal injury.
Always follow all safety instructions to avoid serious
personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Use appropriate personal protective equipment
(PPE) to guard against contact with chemicals.
Chemical substances used in the sprayer system
may be hazardous and toxic.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Pull lever up to disengage
the brake.
133-8062
126-2620
2. Push lever down to
engage the brake.
•
Keep clear of any discharge area of the sprayer
nozzles and spray drift. Keep bystanders and pets
a safe distance away from the machine.
•
Keep children out of the operating area. Never
allow children to operate the machine.
•
Stop the machine, shut off the engine, and remove
the key before filling, emptying, servicing, or
unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional safety information where
needed throughout this manual.
Also, go to www.Toro.com for even more safe
operating practices, including safety tips and training
materials.
Not all the attachments that adapt to this machine
are covered in this manual. Refer to the operator's
manual provided with each attachment for additional
safety instructions.
decal133-8062
1. Fuse location
2. Main, 20 A
3. Regulator, 20 A
decal126-2620
4
, which
126-4122
4. Start relay
5. Relay location
decal126-4122