Toro 34215 Operator's Manual page 70

A. Empty the sprayer tank; refer to
the Sprayer Tank (page
B. Start the machine and set sprayer-pump
switch to the O
C. Push forward the tank agitation lever.
D. Pull back the narrow-spray pattern lever.
Note:
Run the sprayer nozzle until the
narrow nozzle is spraying air.
E. Push forward the narrow-spray pattern lever
and pull back the wide-spray pattern lever.
Note:
Run the sprayer nozzles until the
both wide nozzles are spraying air.
F. Push forward the wide-spray pattern lever.
3. Shut off the sprayer pump and the engine.
Preparing the Sprayer System
Antifreeze type: 2.5 L (0.7 US gallon) rust inhibiting,
non-alcohol based, RV-antifreeze concentrate
Important:
Do not allow all of the antifreeze
mixture to empty from the sprayer tank while
running the sprayer nozzles and wand. Keeping
some of the antifreeze in the pump, valves, and
hoses will help prevent corrosion and damage
caused by moist air trapped in the sprayer system.
1. Mix 2.5 L (0.7 US gallon) RV anti-freeze
concentrate with 5.1 L (1.3 US gallon) water
and pour the antifreeze mixture into the into the
sprayer tank.
Note:
Use a rust inhibiting, non-alcohol based,
RV antifreeze concentrate.
2. Start the machine and set the sprayer-pump
switch to the O
N
3. Pull back the narrow-spray pattern lever to the
O position.
N
Note:
Allow the antifreeze to circulate through
sprayer and nozzle.
4. Push forward the narrow-spray pattern lever and
pull back the wide-spray pattern lever.
Note:
Allow the antifreeze to circulate through
sprayer and nozzle.
5. Push forward the wide-spray pattern lever.
6. Remove the wand from its holder, point it in a
safe direction, and squeeze the spray-wand
trigger.
Note:
Allow the antifreeze to circulate through
sprayer and nozzle and then return the wand to
its holder.
7. Set the sprayer-pump switch to the O
and shut off the engine.
Emptying
39).
position
N
position.
FF
position
70