Figure 25
1. Forward cover
2. Clip nut
4.
Remove the drive pin that secure the impeller to
the shaft of the impeller motor, and remove the
impeller from the shaft
27).
Figure 26
1. Drive pin
2. Shaft
g033530
3. Thumb screw
(Figure 26
and
Figure
g027324
3. Impeller
5.
Place a shallow pan under the shaft of the
impeller motor
Disconnecting the Rate-Gate Linkage
1.
Push the locking sleeve for the gate cable
rearward and lift the cable up from the ball stud
of the rate-gate linkage
27
Figure 27
(Figure
27).
(Figure
28).
g027325