4
Connecting the Battery
No Parts Required
Procedure
1.
Remove the battery cover from the battery box
(Figure
3).
1. Battery box
2. Battery support
3. Buckle
4. Battery strap
2.
Install the positive-battery cable to the positive
(+) battery terminal with a flanged bolt and
flanged nut
(Figure
3.
Install the negative-battery cable to the negative
(–) battery terminal with a flanged bolt and
flanged nut
(Figure
4.
Install the cover on the battery box and secure
the cover and box to the battery tray with the
battery strap
(Figure
Figure 3
5. Battery cover
6. Negative terminal
7. Positive terminal
3).
3).
3).
Product Overview
1. Motion/steering control
2. Engine/spreader—sprayer
controls
3. Spray wand
4. Hopper cover
g027115
10
Figure 4
5. Hopper
6. Impeller
7. Sprayer nozzles
g033350