Rear Seat Cushion
Rem oval: Push in locking tabs (1)
(on left and right side of seat) and
pull up seat at the front.
Installation: Slide rear edge of
cushion under the backrest so that
both w ire loops under the backrest
engage at the seat cushion. Push
front of cushion down until it locks
in place.
Caution!
W atch out for sharp edges when
rem oving or installing the rear seat
cushion, to prevent injury.
P92-0004-B13
Manual Closing of T runk Lid
The trunk lid can be closed
m anually should a m alfunction
o ccur on the pow er closing
system .
W ith the trunk lid open:
push sliding sw itch to position (1),
press eye of latch in (2),
push sliding sw itch to position (3).
Close trunk lid.
Manual R etraction of
Trunk Lid Handle
The trun k lid handle can be
retracted m anually should a
m alfunction o ccur with the
a utom atic system .
Push sliding sw itch down (1) and
to the right (2).
121