Table of Contents
Advertisement
2.6 Interfaces from C5240
X105
X104
X103
X119
2.6.1 PS/2 connections (X103, X104)
The upper PS/2 connector (X104) allows a PS/2 mouse to be used, while a PC keyboard can be
connected to the lower PS/2 connector (X103).
2.6.2 Serial interface COM1 (X105)
The basic version of the Industrial PC has one serial interfaces COM1 (X105), using the type RS 232,
which is brought to a 9 pin SUB-D plug connector.
2.6.3 Network connection LAN1, LAN2 (X106, X107)
The RJ-45 connectors (X106, X107) allow the PC to be connected to a 100/1000BASE-T Local Area
Network (LAN).
2.6.4 USB interfaces USB1 – USB4 (X108, X109, X110, X111)
The four USB interfaces (X108 – X111) are used to connect peripheral devices with USB connections.
USB3.0 standard is supported.
Two more USB interfaces (X112 – X113) are located behind the front flap. USB2.0 standard is supported.
2.6.5 Sound-On-Board (X114, X115, X116)
The Industrial PC has an on-board-interface with the following connectors: Line In (X116), Line Out
(X115) and Microphone jack (X114).
2.6.6 DVI-D (Digital Visual Interface) (X117, X118)
The DVI connectors (X117, X118) are used for transferring the video signal. DVI-D standard is supported.
2.6.7 DisplayPort (X119)
The DisplayPort (X119) is used for transferring the video signal.
2.6.8 Additional plug-in cards (optional)
There is a type plate on the top of the Industrial PC which provides information about the hardware
configuration of the Industrial PC at the time it was supplied.
C5240
X117
X106
X118
X109
X108
X116
X115
X107
X111
X114
X110
Product Description
13
Advertisement
Table of Contents
