■ Error Code 82
Paper Jam
Recording paper jam.
The Paper width sensor could not detect the leading edge of recording papers.
<User Check>
- Release the release lever in the inner part of the Paper tray and remove the jammed
recording paper.
- Check if the recording paper used is according to specifications.
- Check if dark recording paper is not used.
- Clean the Platen.
- Check if the Paper tray is loaded correctly into the machine.
- Check if the Jam clear cover is properly closed.
- Clean the Paper pull-in roller.
Step
1
Foreign materials in the
recording paper feeding path
2
Paper feeding path parts out of
place
3
Paper feed roller stained
4
Paper feed motor harness
connection failure
5
Paper pull-in roller worn out
6
Paper feed roller defective
7
Paper feed motor defective
8
Paper width sensor defective
9
Main PCB defective
Cause
Remove foreign materials.
Reattach the paper feeding path parts.
Clean the Paper feed roller.
Reconnect the Paper feed motor harness.
Replace the Paper pull-in roller.
Replace the Paper feed roller.
Replace the Paper feed motor.
Replace the Carriage PCB ASSY.
Replace the Main PCB ASSY.
2-37
LCD
Solution
Confidential