Brother MFC Series Service Manual page 182

(6) Take out the Ink refill ASSY.
Head joint
Ink supply tubes
Black
Yellow
Cyan
Magenta
Lower cover
Tube guide
Tube support plate
Note Do not remove the Protective part. Doing so in this state will make the ink inside
•
the ink tubes flow out.
• The Ink absorber felt (for the Ink refill ASSY) attached to the bottom of the Ink refill
ASSY may get stained with ink. If there is a significant stain, replace the Ink
absorber felt.
Assembling Note
• When attaching the tube clamps to the Ink supply tubes, view the machine from the
front, attach the right tube clamp (1) to magenta, bind cyan and yellow, attach the left
tube clamp (2) to black, and bind yellow and cyan (refer to the illustration on the previous
page).
Ink sensor flat cable
Sponge
Tube support wire elbow
3-74
Ink cartridge detection
sensor PCB
Ink refill ASSY
Ink absorber box
Ink remaining sensor
flat cable guide
Tube
clamp (1)
Tube
clamp (2)
Black
Yellow
Cyan
Magenta
(3_052L)
Confidential