Customize Code Destinations (Maintenance Mode 74) - Brother MFC Series Service Manual

1.4.24 Customize Code Destinations (Maintenance mode 74)

<Function>
This function customizes the machine according to settings of the language, functions, and
worker switches.
<Operating Procedure>
(1) Enter [7] and [4] in the initial stage of the maintenance mode.
The machine displays "Select 74?" on the LCD.
(2) Press [Mono Start].
The machine displays current settings on the LCD.
(3) Enter the desired customizing code.
(4) Press [Mono Start].
This saves the new setting and returns the machine to the initial stage of the
maintenance mode.
If the destination code is changed, "PLS UPDATE PROG" appears on the LCD. Load
the latest firmware (refer to
(5) Pressing [Stop] during the above procedure returns the machine to the initial stage of
the maintenance mode without saving the customizing code.
Note If no keys are pressed for at least one minute with any display state, the machine
automatically returns to the initial stage of the maintenance mode.
■ EEPROM customizing codes list
DCP-J100
DCP-J105
DCP-J132W
DCP-J152W
DCP-J172W
DCP-T300
DCP-T500W
DCP-T700W
MFC-J200
MFC-J245
MFC-T800W
Chapter 4, Section
US Mexico
- 0001
- 0101
- -
0001 -
- -
- 0001
- 0001
- 0101
- 0001
0001 -
- 0001
1.3).
Brazil Argentina
0042 -
0142 0136
- -
- 0036
- -
0042 0036
0042 0036
0142 -
0042 0036
- -
- -
5-45
Chile
0036
0136
-
0036
-
0036
0036
0136
0036
-
-
Confidential