Two Or More Sheets Of Paper Fed At A Time; Recording Paper Feeding At An Angle - Brother MFC Series Service Manual

4.2.2

Two or more sheets of paper fed at a time

<User Check>
- Check if the recording paper is loaded correctly in the Paper tray.
- Check if the number of recording paper loaded in the Paper tray is within specified
volume.
- Try reversing the recording paper in the Paper tray, or rotating direction of the paper for
180 degrees.
- Check if the recording paper's thickness is within specifications.
- Shuffle recording papers thoroughly and then reload them in the Paper tray.
Step
1 Bank ASSY worn out
2 Base pad worn out
4.2.3

Recording paper feeding at an angle

<User Check>
- Check if the recording paper is loaded correctly in the Paper tray.
- Adjust the paper tray guide to match the recording paper size.
- Check if the recording paper's thickness is within specifications.
- Check if too much recording paper is loaded in the Paper tray.
- Clean the Paper pull-in roller.
Step
1 Paper pull-in roller not
mounted in place
2 Paper feeding path parts out of
place
3 Main PCB defective
Cause
Replace the Paper tray.
Replace the Base pad.
Cause
Reattach the Paper pull-in roller.
Set the paper feeding path parts into place.
Replace the Main PCB ASSY.
2-46
Solution
Solution
Confidential