Brother MFC Series Service Manual page 157

2) Connect the CIS flat cable to the CIS unit, and route it around the cable guide as
shown below.
[Main unit side] Install the CIS flat cable in the following order and adjust
the bend of the cable in the location marked by the dotted circle.
CIS flat cable
① Double-sided tape
CIS flat cable
Double-sided tape
[CIS side] Align the
fold of the CIS flat
cable and attach it to
the CIS carriage
without any bending.
The pasting portions to the CIS
carriage have low adherence
property. Firmly press on it
three times or more.
③ Double-sided tape
CIS flat cable
CIS carriage
3-49
② Double-sided
Document scanner
bottom cover
(3_061)
Confidential