Brother MFC Series Service Manual page 42

Error
Code
Overcurrent protection was activated in the driver IC during Purge cam
5D
operation.
Overcurrent protection was activated in the driver IC during
5E
Maintenance unit pump operation.
75 Head capping does not work normally.
76 Head uncapping does not work normally.
7E Head property information not input
Recording paper size error (during fax/list printing)
80
The Registration sensor and Paper width sensor detected a recording
paper smaller than the specified size.
Recording paper size error (during operations other than fax/list
printing)
81
Paper width sensor detected a recording paper smaller than the
specified size.
Recording paper jam
82
The Paper width sensor could not detect the leading edge of recording
papers.
Recording paper jam
84
The Registration sensor stays in Paper-feeding state even after
completing Paper ejection.
The Paper width sensor could not detect the home position specified
89
on the Paper feed roller.
The PF encoder sensor cannot detect the rotation of the Paper feed
8A
motor.
Overcurrent protection was activated in the driver IC during Paper feed
8C
motor operation.
Paper feed motor does not stop.
8F
The PF encoder sensor cannot detect the rotation of the Paper feed
motor.
The Document scanner sensor detected that the Document scanner
A1
unit is open.
The Document scanning position sensor detected that the document
A2
has a length of 900 mm or longer.
During document scanning, the Document detection sensor detected
A3 that the document is pulled out. Or, the Document scanning position
sensor could not detect a document within the specified time.
A CIS scanning result level abnormality was detected during fax
A5
sending. (During the first sending)
A CIS scanning result level abnormality was detected during fax
A6
sending. (After retrying)
A7 The CIS unit type is different from the CIS type input value.
A8 Matching of color parameter failed
AF CIS positioning problem (home position cannot be found)
BD Black level value abnormal during scanning
Description
2-10
Reference
2-33
2-33
2-34
2-34
2-34
2-35
2-36
2-37
2-38
2-38
2-39
2-39
2-39
2-40
2-40
2-41
2-41
2-41
2-42
2-42
2-42
2-43
Confidential