Error Messages - Brother MFC Series Service Manual

3.2

Error Messages

First Line
B&W 1-sided Print
Only
Replace Ink
/Refill [XX] Ink
BT Call Sign On
(UK only)
Cannot Detect
Cannot Detect Ink
Volume
Cannot Print
Replace Ink
/Refill [XX] Ink
Close Ink Cover
Comm.Error
Connection Fail
Cover is Open.
Data Remaining in
Memory
Disconnected
Document Jam
DR Mode in Use
High Temperature
Status
Ink ejection has reached the specified
number of times when the Ink remaining
sensor detects that the ink replacement / refill
period is approaching. Only black printing is
possible.
The receiving mode cannot be changed
since the BT Call sign is ON.
The Ink cartridge cannot be detected
properly.
The ink volume cannot be detected properly.
Ink ejection has reached the specified
number of times when the Ink remaining
sensor detects that the ink replacement / refill
period is approaching.
An open Ink cover was detected.
A problem occurred in fax communication.
The receiver fax cannot set Polling.
An open Scanner cover was detected.
Data cannot be processed since the memory
is full.
The receiver's fax machine stopped.
The Document scanning sensor detected a
document jam inside the ADF.
The receiving mode cannot be changed from
manual to other modes since the Distinctive
Ring mode is enabled.
The Casing internal thermistor detected that
the room temperature is too high.
2-12
Error
Reference
Code
27, 28, 2-21
29
20, 21, 2-19,
22, 23, 2-20
24, 25
26, 27, 2-21
28, 29
2F 2-23
Section
4.9
Section
4.9
A1 2-40
Section
4.10.2
Section
4.9.1
A2, A3 2-40,
2-41
Section
4.9
Confidential