If You Replace The Control Panel Assy; Adjust The Touch Panel (Maintenance Mode 78) (Only For Models With A Touch Panel); Operational Check Of The Lcd (Maintenance Mode 12); Check The Operation Of The Control Panel Keys (Maintenance Mode 13) - Brother MFC Series Service Manual

4

IF YOU REPLACE THE CONTROL PANEL ASSY

<Operations>

4.1 Adjust the Touch Panel (Maintenance mode 78) (only for models with a touch panel)

4.2 Operational Check of the LCD (Maintenance mode 12)

4.3 Check the Operation of the Control Panel Keys (Maintenance mode 13)

<Requirements>
(1) Stylus for Touch panel
4.1 Adjust the Touch Panel (Maintenance mode 78) (only for models with a
touch panel)
Refer to Chapter 5 "1.4.28 Adjust the Touch Panel (Maintenance mode 78)"
the execution.
4.2 Operational Check of the LCD (Maintenance mode 12)
Refer to Chapter 5 "1.4.7 Check LCD operation (Maintenance mode 12)"
execution.
4.3 Check the Operation of the Control Panel Keys (Maintenance mode 13)
Refer to Chapter 5 "1.4.8 Operational Check of Keys on Control Panel (Maintenance mode
13)" for details on the execution.
4-18
for details on
for details on the
Confidential