Setting The Dim Timer For The Backlight; Dial Prefix (Mfc Models Only); Setting Up The Prefix Number - Brother MFC-L8650CDW Advanced User's Manual

Setting the Dim Timer for the
backlight
You can set how long the Touchscreen LCD
backlight stays on after you go back to your
Home screen.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display General Setup.
d
Press General Setup.
e
Swipe up or down, or press a or b to
display LCD Settings.
f
Press LCD Settings.
g
Press Dim Timer.
h
Press Off, 10Secs, 20Secs or
30Secs.
i
Press .
Dial Prefix
(MFC models only)
1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside
number, use this setting to automatically dial
9 for every fax you send.

Setting up the prefix number

a
Press
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Swipe up or down, or press a or b to
display Dial Prefix.
f
Press Dial Prefix.
g
Press On (or Off).
h
Press Dial Prefix.
i
Enter the prefix number (up to 5 digits)
using the Touchscreen's keyboard.
Press OK.
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• If pulse dialing mode is on, # and l are not
available to use.
j
Press .
General Setup
.
1
1
1
5