Barco DP2K SLP Series User And Installation Manual page 91

Image 8-6
4. Connect the DC plug, the RJ45 Ethernet plug and the D-SUB plug of the customized cable into their respective sockets on the
Touch Panel interface.
Image 8-7
5. Connect the circular plug of the customized cable with the circular socket (reference 6 image 8-8) at the right side of the Local
Keypad of the projector.
Caution: To avoid connector damage, align the pins before you connect the customized cable.
Note: Ensure to tighten the locking nut on the connector.
Image 8-8
6. Attach the multi cable to the swivel arm using the two Velcro strips.
7. Position the Touch Panel interface in the desired location. See "Repositioning the Touch Panel interface", page 88.
R5906847 DP2K SLP SERIES 02/06/2017
5
6
8. Communicator Touch Panel
87